Band

Two-part bands to be mounted on reinforced concrete poles, wooden poles or steel poles are made of steel, and as a standard galvanized, but upon request we also make those hot-dip galvanized. They are used to hold the tension and suspension clamps for the aerial bundle conductors or when several home connections are necessary in one place. They are made in three variants: with a welded hook for mounting of a universal aluminum console, with a welded plate where aluminum console is mounted by hex screw, and with a welded spiral hook. They are made for pole diameters from 120 mm to as much as 360 mm!

Clips with a Hook

Minimum required clip forces
F1=800daN ;G1=200daN
F2=2000daN; G2=500daN

Clips with a Spiral Hook (without AL console)

It serves for fixing the suspension and tension elements on concrete, wooden and steel poles or when several home connections are necessary in one place. As a standard, they are made galvanized, but upon buyer request we also make those hot-dip galvanized. A benefit of using these clips is that they are without a console.

Clips with a Plate

MINIMUM REQUIRED CLIP RATED FORCES:
F1=800daN ;G1=200daN
F2=2000daN; G2=500daN

Clip for Extending Concrete - Wood Poles

It is used to extend connect wooden poles on concrete stands